ENGINE 3-45 CLUTCH LIFTER CLUTCH LIFTER DRIVE CAM AND DRIVEN CAM INSPEC- TION • Inspect the clutch lifter drive cam and driven cam for wear or damage. If any defects are found, replace the clutch lifter drive cam and driven cam as a set. CLUTCH LIFTER PIN ADJUSTMENT NOTE: When adjusting the clutch lifter, it is not necessary to install the clutch onto the countershaft. • Assemble the following parts into the primary driven gear assembly. (3-94 to -97) * Clutch sleeve hub * Spring washer seat, Spring washer * Clutch drive plates, Clutch driven plates * Pressure plate E * Clutch springs, Clutch springs set bolts Clutch spring set bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft) L • Remove the clutch assembly from the primary driven gear assembly. P M A S