4 - 5 (1) Place RT in field pack with antenna on the left shoulder. (2) Fold top flap of field over RT and secure flap to field pack using straps and buckles. k. Set Presets. Set-- (1) CHAN: 1 (2) MODE: SC (3) RF PWR: HI (4) VOL: Mid Range (5) DIM: Full clockwise (6) FCTN: LD (7) DATA RATE: OFF l. Single-Channel Loading Frequencies. (1) Obtain Ranger SOI: (2) Set FCTN: LD (3) Set mode: SC (4) Set CHAN: MAN, Cue, or set channel (1 to 6) where you want to store frequency (5) Press FREQ: (Display will show "00000” or frequency RT is currently turned on) (6) Press CLR: (Display will show five lines) (7) Enter: The number of the new frequency. If you make a mistake with a number press CLR (8) Press STO: (Display will blink) (9) Set FCTN: SQ ON m. Clearing of frequencies. (1) Set Mode: SC (2) Set CHAN: MAN, Cue or desired channel where frequency is to be cleared (3) Press FREQ: (4) Press CLR: (5) Press Load, STO (6) Set FCTN: SQ ON n. Scanning of multiple frequencies. (1) Load: All desired frequencies using "Single Channel Loading Frequencies" instructions (2) Set CHAN: CUE (3) Set SC: FH (4) Set FCTN: SQ ON (5) Press STO: (Display will say SCAN) (6) Press 8: You can now scan more than one frequency 4-3. AUTOMATED NET CONTROL DEVICE. The RTO retrieves all necessary COMSEC and information from the ANCD. To retrieve the SOI from an ANCD: a. Press the On button on the ANCD keypad. b. Press the Letter Lock button to unlock the keys on the ANCD. c. Press Main Menu key (onscreen) Appl Date Time Setup Util Bit d. Using the arrow keys, scroll over to Appl and press the Enter button on the keypad. e. Once you have entered into the Appl (applications) menu using the arrow keys, scroll over to SOI and press the Enter button on the keypad. For example– RDS SOI Radio.