ELECTRICAL SYSTEM 9-39 SWITCHES INSPECTION Inspect each switch for continuity with a tester. If any STARTER BUTTON abnormality is found, replace the respective switch Color O/W Y/G O/R Y/W assemblies with new ones. Position HAZARD SWITCH PUSH Color HORN BUTTON Position BLblLgColor (OFF) Position B/Bl B/W (ON) IGNITION SWITCH (For E-02, 19, 24) PUSH Color FRONT BRAKE SWITCH R O Gr Br Position Color B/R B/Bl ON Position OFF OFF LOCK ON P REAR BRAKE SWITCH IGNITION SWITCH (For E-03, 28, 33) Color OW/B Color Position R O O/Y Gr Br OFF Position ON ON E OFF CLUTCH SWITCH LOCK L Color B/W B/Y P Position P DIMMER SWITCH OFF Color MON Position WYO OIL PRESSURE SWITCH HI (
) A Color ( ) Position G/Y Ground LO  S TURN SIGNAL SWITCH ON (engine is at stop) Color Lg Lbl B OFF (engine Position is running) L NOTE: PUSH Before inspecting the oil pressure switch, check if the R engine oil level is correct. (2-12) PASSING LIGHT SWITCH Color WIRE COLOR OY Position B : Black Lbl : Light blue R : Red Br : Brown Lg : Light green W : White Gr : Gray O : Orange Y : Yellow PUSH B/BI : Black with Blue tracer ENGINE STOP SWITCH B/R : Black with Red tracer B/W : Black with White tracer Color O/B O/W B/Y : Black with Yellow tracer Position G/Y : Green with Yellow tracer ( ) O/B : Orange with Black tracer OFF  O/R : Orange with Red tracer ( ) O/W : Orange with White tracer RUN  O/Y : Orange with Yellow tracer W/B : White with Black tracer Y/G : Yellow with Green tracer Y/W : Yellow with White tracer