3-92 ENGINE OIL PUMP • Install the O-ring to the oil pump and apply SUZUKI SUPER GREASE “A” to it.  Use a new O-ring to prevent oil leakage. NOTE: Set the oil pump shaft end A to the water pump shaft. 99000-25030: SUZUKI SUPER GREASE “A” (USA) 99000-25010: SUZUKI SUPER GREASE “A” (Others) • Install the oil pump with the oil pump mounting bolts and then tighten them to the specified torque. Oil pump mounting bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft) • Install the washer 1 and pin 2. NOTE: Be careful not to drop the washer 1 and pin 2 into the crank- case. E • Install the oil pump driven gear 3. L • Install the snap ring 4. P M A S CLUTCH NOTE: Before assembling the clutch, adjust the clutch lifter. (3-45) • Install the thrust washer onto the countershaft. NOTE: The chamfer side A of thrust washer faces inside.