ENGINE 3-93 • Install the oil pump drive gear 1 to the primary driven gear assembly 2. • Install the primary driven gear assembly 2. NOTE: * If it is difficult to install the primary driven gear, rotate the crankshaft. * Be sure to engage the oil pump driven gear with the drive gear and the primary driven gear with the drive gear. • Install the bearing 3 and spacer 4, and apply engine oil to them. • Install the thrust washer 5. • Install the wave spring washers 6, clutch lifter driven cam 7 E and clutch lifter drive cam 8 to the clutch sleeve hub 9. L NOTE: * Apply a small quantity of MOLYBDENUM OIL SOLUTION to P the contact surfaces of the clutch lifter drive cam 8 and driven cam 7. M * Be sure to align the punch marks A on the clutch lifter drive cam 8 and driven cam 7. A MOLYBDENUM OIL SOLUTION S