8-24 CHASSIS FRONT FORK INNER ROD LOCK NUT • Adjust the height H of the inner rod threads by turning the lock-nut 1 as shown in illustration. H: 11 mm (0.43 in) FORK SPRING • Install the fork spring as shown in the illustration. Upper side Lower side • Install the spring 1, washer 2, spacer 3 and spring retainer E 4. PL SAM FRONT FORK CAP BOLT • Pull up the inner rod with the special tool A. • Compress the spring with the special tool B and then insert the special tool C between the lock-nut and the spacer. 09940-50120: Inner rod holder A 09940-94930: Front fork spacer holder B 09940-94922: Stopper plate C