8-56 CHASSIS • Draw out the swingarm pivot bearings 1 and the swingarm cushion rod upper bearings 2 with the special tool. 09921-20240: Bearing remover set (1 28 mm) (2 17 mm)  The removed bearings must be replaced with new ones. CUSHION LEVER BEARING E • Insert the spacer into bearing and check the play when mov- ing the spacer up and down. L • If excessive play is noted, replace the bearing with a new one. P M A S • Draw out the cushion lever bearings with the special tool. 09921-20240: Bearing remover set (1 20 mm) (2 17 mm)  The removed bearings must be replaced with new ones. CUSHION LEVER AND CUSHION LEVER RODS • Inspect the cushion lever and cushion lever rods for damage.