CHASSIS 8-55 • Set the swingarm pivot boss by its set screws. • Tighten the swingarm boss nut to the specified torque. Swingarm pivot boss nut: 65 N·m (6.5 kgf-m, 47.0 lb-ft) INSPECTION AND DISASSEMBLY E SPACER L • Remove the spacers from swingarm. • Remove the spacers from the cushion lever. P • Inspect the spacers for any flaws or other damage. If any defects are found, replace the spacers with new ones. M A S SWINGARM BEARING • Insert the spacer into bearing and check the play when mov- ing the spacer up and down. • If excessive play is noted, replace the bearing with a new one.