ELECTRICAL SYSTEM 9-3 CAUTIONS IN SERVICING CONNECTOR • When connecting a connector, be sure to push it in until a click is felt. Click • Inspect the connector for corrosion, contamination and break- age in its cover. COUPLER Click • With a lock type coupler, be sure to release the lock when dis- connecting, and push in fully to engage the lock when con- necting. • When disconnecting the coupler, be sure to hold the coupler itself and do not pull the lead wires. • Inspect each terminal on the coupler for being loose or bent. • Inspect each terminal for corrosion and contamination. E L CLAMP P • Clamp the wire harness at such positions as indicated in CORRECT INCORRECT “WIRE HARNESS ROUTING”. (10-18 to -20) M • Bend the clamp properly so that the wire harness is clamped securely. A • In clamping the wire harness, use care not to allow it to hang down. S • Do not use wire or any other substitute for the band type clamp. FUSE • When a fuse blows, always investigate the cause to correct it and then replace the fuse. • Do not use a fuse of a different capacity. • Do not use wire or any other substitute for the fuse.