3-90 ENGINE • Install the starter idle gear No. 1 shaft 6, thrust washer 7, bearing 8, starter idle gear No. 1 9, washer 0, and spring washer A. • Install the dowel pins B and new gasket C.  Use a new gasket to prevent oil leakage. • Install the starter idle gear cover and tighten its bolts to the E specified torque. L Starter idle gear cover bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft) NOTE: P Fit a new gasket washer to the bolt D. M  Use a new gasket washer to prevent oil leakage. A S GEARSHIFT SYSTEM • Install the gearshift cam stopper 1, its bolt 2, washer 3 and return spring 4. NOTE: Apply a small quantity of THREAD LOCK to the gearshift cam stopper bolt 2 and tighten it to the specified torque. 99000-32050: THREAD LOCK “1342” Gearshift cam stopper bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft) NOTE: Hook the return spring end A to the stopper 5. • Check the gearshift cam stopper moves smoothly. • Locate the gearshift cam in the neutral position.