1-6 GENERAL INFORMATION FRONT FORK OIL Use fork oil L01 or an equivalent fork oil. ENGINE COOLANT Use an anti-freeze/engine coolant compatible with an aluminum radiator, mixed with distilled water only. WATER FOR MIXING Use distilled water only. Water other than distilled water can corrode and clog the aluminum radiator. ANTI-FREEZE/ENGINE COOLANT The engine coolant performs as a corrosion and rust inhibitor as well as anti-freeze. Therefore, the engine coolant should be used at all times even though the atmospheric temperature in your area does not go down to freezing point. Suzuki recommends the use of SUZUKI COOLANT anti-freeze/engine coolant. If this is not available, use an equivalent which is compatible with an aluminum radiator. LIQUID AMOUNT OF WATER/ENGINE COOLANT Solution capacity (total): Approx. 2 400 ml (2.5/2.1 US/Imp qt) For engine coolant mixture information, refer to cooling system section in page 7-2.  E Mixing of anti-freeze/engine coolant should be limited to 60%. Mixing beyond it would reduce L its efficiency. If the anti-freeze/engine coolant mixing ratio is below 50%, rust inhabiting perfor- mance is greatly reduced. Be sure to mix it above 50% even though the atmospheric tempera- ture does not go down to the freezing point. P M A S