8-80 CHASSIS • Pull out the dust boot 5, then remove the snap ring 6. 09900-06108: Snap ring pliers • Remove the push rod 7, piston/primary cup 8 and spring 9. MASTER CYLINDER INSPECTION E CYLINDER, PISTON AND CUP SET L • Inspect the cylinder bore wall for any scratches or other dam- age. P • Inspect the cup set and each rubber part for damage. M A S MASTER CYLINDER REASSEMBLY Reassemble the master cylinder in the reverse order of disas- sembly. Pay attention to the following points:  * Clean the master cylinder components with fresh brake fluid before reassembly. Never use cleaning solvent or gasoline to clean them. * Do not wipe the components with a rag. * Apply brake fluid to the cylinder bore and all the component to be inserted into the bore. Specification and classification: DOT 4