8-74 CHASSIS  * This brake system is filled with an ethylene glycol-based DOT 4 brake fluid. Do not use mix different types of fluid such as silicone-based or petroleum-based. * Do not use any brake fluid taken from old, used or unsealed containers. Never reuse brake fluid left over from the last servicing or stored for long periods. * When storing the brake fluid, seal the container completely and keep away from children. * When replenishing brake fluid, take care not to get dust into fluid. * When washing brake components, use fresh brake fluid. Never use cleaning solvent. * A contaminated brake disc or brake pad reduces braking performance. Discard contaminated pads and clean the disc with high quality brake cleaner or neutral detergent.  Handle brake fluid with care: The fluid reacts chemically with paint, plastics, rubber materials etc. and will damage then severely. BRAKE PAD REPLACEMENT • Remove the pad mounting pin 1 and spring 2. E L P • Remove the brake pads. M  A * Do not operate the brake pedal with the pads removed. S * Replace the brake pads as a set, otherwise braking performance will be adversely affected. • Install the new brake pads and shims. Pad mounting pin: 17 N·m (1.7 kgf-m, 12.5 lb-ft) NOTE: After replacing the brake pads, pump the brake pedal a few times to set the brake parts correctly and then check the brake fluid level.