8-42 CHASSIS • Remove the dust seal with the special tool. 09913-50121: Oil seal remover  The removed dust seal must be replaced with a new one. • Remove the dust seal with the special tool. 09913-50121: Oil seal remover  The removed dust seal must be replaced with a new one. INSPECTION AND DISASSEMBLY E TIRE INSPECTION (2-27 and 8-82) L WHEEL INSPECTION (8-82) P REAR AXLE M • Using a dial gauge, check the rear axle for runout. • If the runout exceeds the limit, replace the rear axle. A Axle shaft runout: Service Limit: 0.25 mm (0.010 in) S 09900-20607: Dial gauge (1/100 mm) 09900-20701: Magnetic stand 09900-21304: V-block set (100 mm) WHEEL DAMPER • Inspect the damper for wear and damage. • Replace the damper if there is anything unusual.