ENGINE 3-83 • Tighten the crankcase bolts a little at a time to equalize the pressure. NOTE: * Fit the new copper washers to the crankcase bolts B. * Fit the new gasket washers to the crankcase bolts C. Crankcase bolt: (M6) Initial: 6 N·m (0.6 kgf-m, 4.5 lb-ft) Final : 11 N·m (1.1 kgf-m, 8.0 lb-ft) (M8) Initial: 15 N·m (1.5 kgf-m, 11.0 lb-ft) Final : 26 N·m (2.6 kgf-m, 19.0 lb-ft)  Use the new copper washers and new gasket washers to prevent oil leakage. • Check that the driveshaft and countershaft rotate smoothly. E L P M A OIL STRAINER S • Install the O-ring. • Apply SUZUKI SUPER GREASE “A” to the O-ring. 99000-25030: SUZUKI SUPER GREASE “A” (USA) 99000-25010: SUZUKI SUPER GREASE “A” (Others)  Use a new O-ring to prevent oil leakage. • Install the oil strainer 1 as shown and tighten the oil strainer bolts to the specified torque. Oil strainer bolt: 10 N·m (1.0 kgf-m, 7.0 lb-ft)